Good price  online

products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Glue Potting Machines
Created with Pixso.

Three-chamber vacuum potting machine -Anti-curing -independent pre-evacuation chamber-Vision positioning-CCD camera-recognize Mark points -servo motors + screw modules

Three-chamber vacuum potting machine -Anti-curing -independent pre-evacuation chamber-Vision positioning-CCD camera-recognize Mark points -servo motors + screw modules

MOQ: 1
Detail Information
Highlight:

three-chamber vacuum potting machine

,

CCD vision positioning potting machine

,

servo screw module potting machine

Product Description
Model: HP-GKA200-5
Three-Chamber Vacuum Potting Anti-Curing Design Independent Pre-Evacuation Vision Positioning / CCD Servo + Screw Module

The HP-GKA200-5 is a three-chamber vacuum potting machine engineered for high-efficiency, contamination-free encapsulation. Its independent pre-evacuation, potting, and pressure-holding chambers eliminate repeated vacuum breaks, dramatically reducing takt time while maintaining a stable high-vacuum potting environment.

Equipment Overview

Equipment images are provided for reference only.

Essential Parameters
Equipment Dimensions L3000 * W1600 * H2100 mm (excluding the three-color light)
Equipment Weight Approximately 2,200 kg
Gas Supply 0.4–0.6 MPa
Exhaust —
Power Supply AC 380V 50/60 Hz
Total Power 9.0 kW
System Parameters
Control System PC + motion control card + adhesive filling software
Operating System Windows Chinese Version
Teach Mode Mouse + Keyboard
Communication Port Standard SMEMA interface + Ethernet
Key Parameters
Control Axis Count 3 axis: X / Y / Z
Drive Method Servo motor + (ball screw) module drive
Basic Itinerary Max: 500 * 500 mm
Single-Valve Stroke Max: 500 * 500 mm
Component Height Max: ±110 mm
Translational Speed Maximum X/Y-axis speed: 500 mm/s; maximum Z-axis speed: 300 mm/s
Repeatability Precision ±0.02 mm
Measurement Method Servo motor + screw pump
Proportion Range 1:1–5:1 (if this range is exceeded, the configuration must be changed to meet the requirement)
Resin Discharge Rate 1–5 g/s (if this range is exceeded, the configuration must be replaced to meet the requirement)
Ratio & Gel Extrusion Precision 100 g ±2%
Operable Viscosity Within 50,000 CPS
Hybrid Mode Dynamic mixing
Safe Guarding Safety light barrier installed at the entrance
Vacuum Level -100 kPa
Tank Specifications 30 L
Cleaning Bucket Specifications 2 L
Feeding Method Vacuum material removal / manual material transfer
Vacuum Defoamation Equipped with a vacuum pump for degassing
Level Alarm High/low level alarm
Visual Observation Window The barrel lid is equipped with a transparent viewing port
Transmission Parameters
Transmission Height 910 ±20 mm
Propagation Velocity Adjustable: 0.5–3.5 m/min
Product Flow From left to right
Passing Method Speed Chain
Track Width Fixed width: 500 mm; non-adjustable
Other Parameters
Rack Material Integrated Square-tube frame
Cleaning Device Automatic / Manual fluid discharge
Lighting LED lamp
Optional Features

Items marked as included are part of the standard configuration; others are available upon request.

  • MES System — Device interfaces open for data reading only
  • MES System — Data proactively uploaded to the server
  • Vibration Table
  • Product Weighing
  • Material Tank Stirring
  • Real-Time Level Display
  • Safety Light Curtain
  • Camera Module
  • Waste Water Monitoring
  • Negative Pressure Monitoring
  • Automatic Needle Alignment
  • Video Monitoring (Included)
Functional Highlights
  • Independent three-chamber structure — significantly improves production efficiency.
  • Dedicated chamber zoning — the equipment is divided into a pre-evacuation chamber, a potting chamber, and a pressure-holding chamber. The potting chamber always maintains a high vacuum state, eliminating the need to repeatedly break and re-evacuate the potting chamber, saving long vacuum-pumping waits and significantly improving takt time.
  • Vacuum-dedicated secondary valve — eliminates dripping, leakage, and stringing.
  • Clean adhesive cut-off — the dispensing execution end is equipped with a vacuum-dedicated secondary shut-off valve for clean and decisive adhesive cut-off.
  • Contamination prevention — effectively prevents dripping, leakage, and adhesive stringing from contaminating the chamber and workpiece during movement and station changes, keeping the chamber interior clean and reducing cleaning and maintenance work.
  • Zoned visual observation with intelligent control and traceability — each chamber is equipped with an observation window for viewing workpiece transfer and potting status; the industrial control system monitors vacuum level, pressure, mixing ratio, and chamber status parameters in real time.
  • Data traceability — production data is recorded and saved, with support for MES host computer integration to meet quality traceability requirements.